HOT FILL / 700 ML PET
Hot fill PET bottle for juice and sauces.
For juice and sauces filled at up to 80 °C. Our 700 ml Hot Fill PET bottle opens the possibility of moving from glass to clear PET packaging.
- Volume
- 700 ml
- Filling up to
- 80 °C
- Diameter
- 75 mm

An alternative to glass bottles
NEW TO OUR RANGE
What is the 700 ml Hot Fill PET bottle?
The 700 ml Hot Fill PET bottle offered by Rapid PET and Omorika PET is intended for liquids filled at up to 80 °C. The clear, ribbed bottle is 214.8 mm high and 75 mm in diameter. It is an alternative to glass packaging for juice and pourable sauces, subject to checking the formulation, closure and filling line.
Lighter packaging
Lower packaging weight is a typical advantage of PET over glass. The actual bottles, secondary packaging and distribution conditions need to be compared for your product.
No glass fragments
PET removes glass breakage from the container itself. This is a meaningful difference in handling, storage and distribution.
Let the product show
Clear PET keeps the contents visible. The ribbed body gives this model a distinctive appearance and a starting point for your brand presentation.
APPLICATIONS
Hot fill bottles for juice, sauces and syrups.
We consider Hot Fill packaging in the context of formulation and process. These applications are starting points for selection; suitability is confirmed for the specific product.
PET bottles for juice
For juice, nectars and still drinks filled hot. Share whether your product contains pulp, the filling temperature and your target shelf life.
PET bottles for sauces
An alternative to glass bottles for pourable sauces, tomato sauces and dressings. Viscosity, particles and dispensing requirements guide neck and closure selection.
Syrups and fruit products
An option to explore for syrups and other liquid fruit products. Selection depends on composition, filling conditions and product protection requirements.
MOVING FROM GLASS TO PET
PET or glass for juice and sauces?
PET can offer advantages in packaging weight and handling. Decide on a switch from glass by assessing the filling process and product protection as well as the appearance of the package.
Weight and transport
- Hot Fill PET
- Typically lighter packaging. The actual difference depends on the selected PET and glass models.
- Glass bottle
- Generally a heavier empty container. Use the weight of your existing bottle as the reference.
Handling and breakage
- Hot Fill PET
- No glass fragments from the bottle itself. Appropriate secondary packaging is still needed.
- Glass bottle
- Glass breakage needs to be managed during handling and distribution.
Hot filling
- Hot Fill PET
- Match the Hot Fill bottle and closure to filling temperature, holding time and cooling.
- Glass bottle
- The thermal cycle and appropriate closure also need to be checked for glass packaging.
Product protection
- Hot Fill PET
- Confirm barrier performance, sealing and shelf life for your formulation.
- Glass bottle
- Existing performance provides the reference for comparing the complete packaging system.
Filling line
- Hot Fill PET
- Review bottle handling, filling, capping and labelling for the new format.
- Glass bottle
- Use the current format and line settings as the starting point for planning the change.
HOT FILL / 700 ML MODEL
700 ml Hot Fill bottle: technical specifications.
Clear PET, 700 ml and filling up to 80 °C. The PDF includes the trilingual data sheet and the complete original drawing on page two. You can also open the drawing separately.
HOT FILL / PET
700ml
Hot Fill PET bottle 700 ml
Data sheet & drawingPDF · SR / EN / DE
700 ml model details- Volume at 22 °C
- 700 ml
- Maximum filling temperature
- 80 °C
- Bottle outside diameter
- 75 mm
- Overall height
- 214.8 mm
- Material
- PET
- Thread outside diameter
- 40 mm
- Neck bore
- 34.5 mm
- Preform weight
- 43 g (estimate)
Preform weight is an estimate from the original drawing, not a confirmed finished-bottle weight. Thread diameter does not identify a closure standard.
One PDF: the data sheet in Serbian, English and German, plus the original drawing.
Original drawing (PDF)FROM SELECTION TO INQUIRY
Tell us about your filling line.
For an initial inquiry, describe your product and current packaging. The Hot Fill bottle is automatically linked to your message.
Request a Hot Fill quote- 01
Product and packaging
Tell us about your juice, sauce or other product, required capacity and the glass bottle you currently use.
- 02
Process and closure
Share filling temperature and holding time, cooling method, closure type and key line requirements.
- 03
Quantities and timing
Outline your expected quantities and schedule. Our sales team will respond to your specific inquiry.
Before switching to Hot Fill PET.
What is a hot fill PET bottle?
A hot fill PET bottle is PET packaging intended for hot filling. The Rapid PET and Omorika PET model has a 700 ml capacity and a filling limit of 80 °C. Closure selection, holding time and cooling are matched to the specific product and filling line.
Can hot fill PET replace a glass bottle for juice or sauce?
Hot fill PET can be considered as an alternative to glass for juice, pourable sauces and related products. A specific switch requires confirmation of compatibility with the formulation, thermal cycle, closure and required shelf life.
What is this bottle’s maximum filling temperature?
The 700 ml Hot Fill PET bottle is intended for liquids filled at up to 80 °C. Holding time, cooling and closure selection are matched to the specific product and filling line.
Which closure fits this bottle?
The drawing lists a 40 mm thread outside diameter and a 34.5 mm neck bore. These dimensions do not identify a closure standard. Share your current closure or capping requirements in the inquiry so the combination can be reviewed.
Is every PET bottle suitable for hot filling?
No. Hot filling requires an appropriate Hot Fill bottle and confirmation of the complete system’s performance in the intended process. Other models in the catalogue should not automatically be treated as hot fill bottles.
How can I get the technical data sheet and a quote?
Download the data sheet directly from this page. Page one contains the specification in Serbian, English and German, and page two the original drawing. The quote button opens a form with the 700 ml Hot Fill bottle already linked.
THE NEXT STEP
Your product in a Hot Fill PET bottle?
Send us your planned application. Your inquiry will be linked to the 700 ml model so we can respond to your specific packaging needs.